WUHF - RFID8160M is a high performance UHF RFID Reader Module. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, attendance system, anti-counterfeit and industrial production process control system.
1. Product View
Module Type
|
WUHF-RFID8160M
|
Real Photo
|
|
RF Channel
|
Single Channel
|
RF Connector
|
MMCX
|
Antenna Connection Mode
|
Single Antenna
|
Interface Connector
|
Molex 53261-1571
|
RF Connectors Material
|
Gold-plated brass
|
PCB Material
|
Rogers FR4 gold-plated
|
Shield Material
|
Aluminum
|
Size
|
55.5*39.5*8mm
|
2. PIN Connector Pin Assignments
|
PIN ID
|
Interface
|
Instruction
|
PIN 1
|
GND
|
Meanwhile grounding
|
PIN 2
|
GND
|
PIN 3
|
3.7V – 5V DC
|
Meanwhile connect power
|
PIN 4
|
3.7V – 5V DC
|
PIN 5
|
GPIO 3
|
Output
|
PIN 6
|
GPIO 4
|
Output
|
PIN 7
|
GPIO 1
|
Input
|
PIN 8
|
Beeper
|
Has driven with > 50mA output current
|
PIN 9
|
UART_RXD
|
TTL level
|
PIN 10
|
UART_TXD
|
PIN 11
|
USB_DM
|
For testing
|
PIN 12
|
USB_DP
|
PIN 13
|
GPIO 2
|
Input
|
PIN 14
|
EN
|
High level enable
|
PIN 15
|
GPIO 5
|
RS-485 direction control
|
3. Key Features
|
Feature
|
Descriptions
|
1
|
Impinj R2000 Built-in
|
* Impinj Indy R2000 chip as RF transceiver.
|
2
|
Anti-collision Algorithm
|
* Unique I - Search multi-tag identification algorithm providing the highest efficiency.
|
3
|
Optimized Algorithm for Tags with Small Volume
|
* Optimized applications for reading small volume tags with better respond time.
|
4
|
Dual CPU Architecture
|
* Main CPU: tag inventory; Assistant CPU: data management.
* Tag inventory and data transfer are parallel and simultaneous.
|
5
|
Fast Antenna Switch Inventory (For WUHF-RFID8460M and WUHF-RFID8860M)
|
* Every antenna’s inventory duration is configurable (Minimum duration: 30 ms).
* Polling from ANT 1 to the last antenna.
|
6
|
Two Modes for Inventory
|
* Buffer mode and Real-time mode.
* Tags will be stored as buffer under buffer mode.
* Tags will send data under real-time mode. This mode allows user to get tag data instantly.
|
7
|
Hardware System Halt Detection
|
* Hardware CPU status surveillance.
* Run for 24hours X 365 days without system halt.
|
8
|
PA Health Surveillance
|
* PA status surveillance.
* Make sure PA never works under saturated state. Protect it for long term operation.
|
9
|
18000-6B/6C Full Compatible
|
* It can be switched rapidly between 18000-6B and 18000-6C tag.
|
10
|
18000-6B Large Data Read/Write
|
* Read 216 bytes in one time takes less than 500ms.
* Write 216 bytes in one time takes less than 3.5 seconds.
* It can read/write data with different lengths.
|
11
|
Antenna Connection Detection
|
* Detect antenna connection status.
* Protective for RF receiver.
* It can be canceled by command.
|
12
|
Temperature Sensor
|
* Multi-point surveillance for accurate operating system temperature.
|
13
|
Power Output Correction
|
* Dual modules making sure output power can be finely adjusted.
* Dual modules working and keeping correction unless they are both damaged.
|
14
|
Excellent Cooling Design
|
* Heat dissipation and large cooling surface design.
* Thermal coupling interfaces using high-thermal conductivity solid materials which ensure stable performance under high temperature.
|